◒Soil wetnessWaiting
—unavailable
Waiting for a device reading.
S.L.I.D.E.
Loading
Monitoring station
Station overview
Observed conditions and device health
Last receivedWaiting for first uploadObservation time unavailable
◿Relative tiltWaiting
—unavailable
A valid, calibrated baseline is required.
☁Rain-plate wetnessWaiting
—unavailable
Plate wetness is not rainfall intensity.
♨Air temperatureWaiting
—unavailable
Humidity unavailable.
Upload delivery
Device-side event queue counters from the latest received snapshot.
- Queued event revisions
- Waiting for telemetry
- Events discarded on queue overflow
- Waiting for telemetry
- Event upload retries this boot
- Waiting for telemetry
- Last accepted upload (device uptime)
- Waiting for telemetry
Delivery counters are not yet available.
Recorded conditions
Each trace uses its own unit and scale. Missing samples remain gaps.
Soil wetness (%)
Waiting for history.
Relative tilt (degrees)
Waiting for history.
Air temperature (°C)
Waiting for history.
Stored station readings
Reading history
Values use the device’s available calibration and sensor units.
Waiting for the station service.
| Received | Observed | Soil ADC / wetness | Rain ADC / plate wetness | Relative tilt | Temperature | Device health |
|---|---|---|---|---|---|---|
| No readings have arrived. | ||||||
Station location and health
Monitoring site
Coordinates locate the monitoring station.
Station coordinates are not available yet.
⌖
Device
Waiting for device
Coordinates unavailable.
- Last device contact
- No contact recorded
- GPS fix
- Unavailable
- Satellites
- Unavailable
- MPU baseline
- Unavailable
- Experimental TEST MODE
- Off or unavailable
Authenticated station controls
Station settings
Commands require an online station and expire if it disconnects.
Control status loads from the station.
Baseline and experimental mode
Calibrate with the MPU stationary and firmly mounted. TEST MODE is disabled whenever the ESP32 restarts.
Experimental tilt criteria
Soil and rain-plate calibration
Record observed dry and wet raw endpoints separately for each sensor. Values remain relative wetness.
Recent maintenance commands
A queued action is not complete until the station returns its result.
No commands loaded.